Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Intuitive Digital Switching
Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off.
Internal Battery
Provides 150+ hours of operation from with a charge time of only two hours. The included MicroUSB cable makes charging simple and convenient, meaning the mic can be charged via a computer, power-brick or even your car.
Super Low-Noise
The NTG4 & NTG4+ both feature an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character.
Features
-
Broadcast sound quality
-
Low noise circuitry
-
Condenser transducer
-
Rugged metal construction
-
Internal rechargeable battery with 150 hours operation
-
High Frequency Boost
-
High Pass Filter (0Hz/75Hz)
-
PAD (-10db)
-
Designed and manufactured in Australia
-
Full 10 year warranty (with online registration)
Included accessories
-
RM5 Mic Clip
-
Foam Windshield
-
ZP1 Pouch
-
Micro USB
Specifications
-
Acoustic Principle: Line Gradient
-
Directional Pattern: Super-Cardioid
-
Frequency Range: 20Hz ~ 20,000Hz (selectable HPF @ 75Hz)
-
Sensitivity: -32dB re 1V/Pa (25mV @ 94db SPL) ±2dB @ 1kHz.
-
Output Impedance: 200Ω
-
Equivalent Noise: 16dBA SPL (per IEC651)
-
Maximum Output: 7dBu (@ 1kHz, 1% THD into 1kΩ)
-
Dynamic Range: 119dB (per IEC651)
-
Maximum SPL: 135dB
-
Signal to Noise Ratio: 78dB SPL (per IEC651)
-
Power Req.: 48V Phantom Power(4.8mA current draw) or internal rechargeable lithium battery.
-
Battery Charger: MicroUSB cable (supplied)
-
Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
-
Dimensions: 22 x 278mm
-
Net Weight: 176g