Muscles Meet Mind
Delivering 2 x 1200 W at 4 ohms, the IPX 2400 packs reliable power and performance into a single rack space. But raw muscle power is not enough. At the heart of the IPX platform, you’ll find a cutting-edge DSP engine equipped with up to 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay – and both high- and low-pass filters adjustable to any frequency.
The DSP also provides extensive protection for your loudspeaker system in the form of the innovative software-controlled Speaker Protect Limiter. You can configure this with ease from within the IPX Controller software.
Take Control at the Rack or Anywhere
You can access all setup parameters for input mixing, DSP features and limiter settings on the front panel, using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available and up to 50 user-defined presets may be stored onboard.
Maximum Output Power*
|
2 Ω per channel, stereo |
800 W
|
|
4 Ω per channel, stereo |
1200 W
|
|
8 Ω per channel, stereo |
600 W
|
Controls
|
Front |
Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel)
|
System
|
Number of channels |
|
|
Output voltage |
100 V peak / 70 Vrms / 39.2 dBu
|
|
Input sensitivity for maximum output voltage |
6 dBu
|
|
Output current |
20 Arms
|
|
Output circuit type |
Class-D
|
|
THD+N |
< 0.1%, 20 Hz - 20 kHz @ 1 W
< 0.05% @ 1 kHz, 1 dB below clip
|
|
Output noise |
-65 dBu, A-weighted
|
|
Signal-to-noise |
> 104 dB
|
|
Channel crosstalk |
> 80dB @ 1 kHz
|
|
Frequency response |
10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 dB
|
|
Common mode rejection (CMR) |
> 50 dB
|
|
Gain (all DSP controls set to 0 dB) |
33 dB
|
Indicators
|
Power |
Red LED
|
|
Limit, per channel |
Red LED
|
|
Signal / mute, per channel |
Green/Red LED
|