Specs
Microphone Input
-
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
-
Microphone Input Level: from 6 mVpp to 1.4 Vpp
-
Microphone Input Impedance: 3.2 kOhms
-
Gain Range: 40 dB
-
Phantom Power: +48V ± 4V
-
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
-
Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
-
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
-
Instrument Input Level: from 30 mVpp to 6.9 Vpp
-
Instrument Input Impedance: 1 MOhms
-
Gain Range: 27 dB
-
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
-
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
-
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
-
Headphone Level Control numbered thumbwheel
-
Headphone Level Power 100mW into 50 Ohms
Stereo Headphone Output
-
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
-
Headphone Level Power 100mW into 50 Ohms
MIDI Input/Output
-
Connector: 2x2.5mm TS Jack
Other Input/Output
-
DC barrel: 1x DC barrel. For power and device charging.
-
Device Connector: mini-DIN
Common
-
Conversion: 24-bit A/D, 24-bit D/A
-
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Power:
-
USB bus powered when used with a computer
-
Battery powered (2xAA included) when used with an iOS device
-
DC power supply (not included, iRig PSU 3A sold separately)*
Package includes
-
iRig Pro I/O universal Audio-MIDI interface
-
Lightning to Mini-DIN connection cable (60cm/23.62")
-
USB to Mini-DIN connection cable (60cm/23.62")
-
2 x 2.5mm jack to MIDI cable (160cm/63")
-
2 x 1.5V AA Battery
-
Velcro strip
Dimensions
-
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
-
Weight: ~120g/4.23oz (batteries excluded)
-
Lightning to Mini-DIN connection cable: 60cm/23.62"
-
USB to Mini-DIN connection cable: 60cm/23.62"
-
2.5mm jack to MIDI cable: 160cm/63"
Compatibility
iOS Devices
-
Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation. iOS 6 or later is required.
Computers
-
Mac®: Mac OS X 10.6 or later. One free USB port.
-
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8/10. See our FAQ here for further details.
Android Devices
-
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
-
Micro-USB-OTG to Mini-DIN cable (sold separately) is required.
* Use only the specified AC adaptor
* Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.