Specs
Common
-
Conversion: 24-bit A/D, 24-bit D/A
-
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
-
Power: DC IN
-
Device Connection: USB B-Type 2.0
-
Enclosure: metal sheet
Line Outputs 1-2 (Monitor)
-
Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.
-
Output impedance: 150 Ohms balanced, 75 Ohms unbalanced
-
Output Level: 0 dBFS corresponds to +21 dBu
-
Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 116 dB(A)
-
THD+N: -106 dB(A) at -1 dBFS
-
Channels 1-2 crosstalk: 115 dB(A)
Line Outputs 3-4
-
Configuration: Unbalanced
-
Output impedance: 75 Ohms
-
Output Level: 0 dBFS corresponds to +16 dBu
-
Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 115 dB(A)
-
THD+N: -102 dB(A)
-
Channels 3-4 crosstalk: 112 dB(A)
Output 5 (Amp output)
-
Configuration: Unbalanced, floating, with selectable ground lift
-
Output impedance: 100 Ohms
-
Output Level: 0 dBFS corresponds to -6 dBu
-
Frequency response: From 10 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 110 dB(A)
-
THD+N: -104 dB(A)
Headphones Out
-
Output impedance: Virtually ideal source (zero Ohms) until clipping
-
Maximum Output level: +12 dBu into 50 Ohms load (approx 180 mW)
-
Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 112 dB(A)
-
THD+N: -100 dB(A)
Mic Inputs 1-2
-
Configuration: Class-A discrete differential microphone preamp, pin 2 hot
-
Input impedance: 4 kOhms differential
-
Input level, min gain: 0 dBFS is obtained with a +12 dBu signal at the XLR input
-
Input level, max gain: 0 dBFS is obtained with a -37 dBu signal at the XLR input
-
Frequency response: From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 116 dB(A)
-
THD+N: -106 dB(A) at -10 dBFS
Line Inputs 1-2
-
Configuration: Class-A discrete differential line receiver, tip hot
-
Input impedance: 20 kOhms differential
-
Input level, min gain: 0 dBFS is obtained with a +26 dBu signal at the TRS input
-
Input level, max gain: 0 dBFS is obtained with a -24 dBu signal at the TRS input
-
Frequency response: From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 116 dB(A)
-
THD+N: -106 dB(A) at -10 dBFS
Instrument Inputs 1
-
Configuration: Multiple topology instrument preamp
-
Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
-
Input impedance, ACTIVE mode: 10 kOhms
-
Input level, min gain: 0 dBFS is obtained with a +14 dBu signal at the TS input
-
Input level, max gain: 0 dBFS is obtained with a -17 dBu signal at the TS input
-
Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 117 dB(A)
-
THD, PURE mode: 0.0015 %
-
THD, JFET mode: 0.5 %
Instrument Inputs 2
-
Configuration: Hi-Z instrument preamp
-
Input impedance: 1 MOhms
-
Input level, min gain: 0 dBFS is obtained with a +14 dBu signal at the TS input
-
Input level, max gain: 0 dBFS is obtained with a -17 dBu signal at the TS input
-
Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
-
Dynamic Range: 117 dB(A)
-
THD: 0.006%
Connections and Controls
Front Panel
-
Two 1/4" instrument input jacks
-
Two analog potentiometers for Input GAIN
-
Two 5 segments input level meter (peak)
-
Two INST, LINE, MIC LEDs
-
Analog potentiometers for Z-Tone control
-
Pick-Up selector (PASSIVE/ACTIVE)
-
Preamp topology selector (JFET/PURE)
-
+48V phantom power switch
-
Tuner switch
-
Tuner display and LEDs
-
USB LEDS
-
MIDI IN/OUT LEDs
-
push-encoder for Presets
-
Monitor knob
-
1/4" headphones output jack
-
Master potentiometer for main output control
-
1/4" Amp output jack
Rear Panel
-
On/Off power switch
-
External DC power input
-
MIDI I/O 5-pin DIN connectors
-
B-Type USB socket for connecting a computer (Mac/PC)
-
2 x 1/4" TRS External controllers sockets
-
2 x 1/4" TRS Balanced floating line outputs
-
2 x 1/4" TRS Unbalanced line outputs
-
2 Combo sockets for MIC input and Instrument input (auto selecting)
Package includes
-
AXE I/O
-
USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
-
DC power supply
Dimensions
-
Size: 23.8cm/9.37" x 21.1cm/8.31" x 5.3cm/2.09"
-
Weight: 1.3kg/2.9lb
Compatibility
Computers
-
64-bit application. Requires a 64 bit CPU and Operating System.
Mac® (64-bits)
-
Minimal: macOS 10.11 or later. One free USB port.
Windows® (64-bits)
-
Minimal: Windows 7 or later. One free USB port.