Furman CN-3600S E filter mrežnog napona

SPECIFIKACIJE:

• AC Voltage Input Range 180-270VAC, 50/60Hz
•  
• Maximum AC Current Rating 16 amps (Thermal breaker)
•  
• AC Cord 1.5mm2x3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug
•  
• Rear Panel Outlets 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
• Front Panel 1 IEC C13 (Unswitched)
•  
• Surge/Under-Overvoltage Protection AC Surge Protection Series Multi-Stage Protection SMP
• Spike Protection Mode Line to neutral, zero ground leakage
• Spike Clamping Voltage 375V peak @ 6,000 volts/3,000 amps
• Response Time 1 nanosecond
• Maximum Surge Current 6,500 Amps
• AC Undervoltage Protection EVS, 175VAC+/-3VAC
• AC Overvoltage Protection EVS, 275VAC+/-5VAC
• AC Overvoltage Reset Modes Manual and Auto-reset (configurable)
• AC Filtering LiFT
• Noise Attenuation Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
•  
• Operating Temperature Range 5C (40F) to 40C (105F) degrees
•  
• Humidity Range <90% rH (Relative Humidity)
• Keyswitch Front panel, 3-position keyswitch (On, Off, Remote)
• Keys Included, 1 pair
• Pushbutton Switch Front panel, hidden by security cover
• Circuit Breaker Front panel, pushbutton, 20A Thermal Breaker
• Front panel diagnostic indicators Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
• Front Panel DIP Switches Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
• Potentiometer Front panel, hidden by security cover, fine tune delay adjust
• Control/Status/Triggering (Rear Panel) Remote Terminal +5-30VDC In, 12VDC (12mA) Out
• SmartSequencing Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
• Remote Terminal Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
• Force Off/Delay 3 Terminal Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
• RS-232 Compatible Yes, DB-9 Connector
• IP Addressability Optional, via BB-RS232 Ethernet/RS-232 Adaptor (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
• Voltmeter Available with RS-232/Ethernet option, ± 2VAC accuracy
• Ammeter Available with RS-232/Ethernet option, ±1A accuracy
• Power Consumption (No Load) 10 Watts
• Safety Agency NRTL-C, RoHS Compliant