SPECIFIKACIJE:
-
The first Dante, Pro Tools | HD and Thunderbolt interface system with a monitor controller.
-
Supports a maximum of eight channels, each of up to 12 sources per channel, from 32 available audio sources
-
Controls include level, reference level, preset selection, cut, dim, mute, A/B switch, and a variety of solo modes
-
Up to four fold-down presets allow fast switching for checking downmixes
-
Four destination groups when used with a Red interface, or a single talkback group when used with other Dante devices, high-fidelity output can take its source from a multitude of sources
-
RedNet R1 has an internal talkback microphone, or users can connect their own, via the rear-panel XLR
-
Two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus.
-
RedNet Control is designed for quickly setting up simple or complex configurations
-
Quarter-inch jack socket accepts a footswitch, for talkback management, LFE muting and more
-
Powered via Ethernet (using the PoE standard), or using a DC power supply
What's in the box:
-
RedNet R1
-
1 x 12V 1.2A DC - 1.8m power supply cable (2.5mm locking plug)
-
1 x Cat 6 RJ45 Ethernet Cable
-
Important Information Guide
-
Registration code giving access to online resources
Included Software:
-
RedNet Control
-
Software mixer with a hardware-focussed workflow, which is designed to allow quick setup of both simple and complex monitoring and routing configurations.
System Requirements:
-
Mac OS X
-
10.13 macOS High Sierra
-
10.14 macOS Mojave
-
10.15 macOS Catalina
-
10.16 macOS Big Sur
-
Windows
Technical Specifications:
Internal Talkback
All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω
-
Gain Range: 0dB to 55dB
-
Type: Electronically Balanced, Zin = 3kΩ
-
Max. Input Level: +10dBu ± 0.5dB
External Talkback
All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω
-
Gain Range: 0dB to 55dB
-
Type; Electronically Balanced, Zin = 3kΩ
-
Max. Input Level: +10dBu ± 0.5dB• Frequency Response: 20Hz - 20kHz ± 2dB
-
THD + N: < -98dB (0.0012%) @ -1dBFS
-
EIN: < -128dBu 'A'-Weighted (typical)
-
Signal-to-Noise Ratio: -111dB 'A'-Weighted (typical), min gain
-
Common-Mode Rejection Ratio: 50/60Hz CMRR: <-77dB
Headphone Output
All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω
-
0 dBFS Reference Levels: +11dBm
-
Frequency Response: 20Hz to 20kHz ±0.5dB
-
THD + N: -100dB (0.001%) @ -1dBFS, Rs = 150R
-
Dynamic Range: 108dB 'A'-weighted (typical), 20Hz - 20kHz
-
Noise in Presence of Signal (NiPoS): > -97 dBu 'A-Weighted'
-
Output Impedance: 5Ω• Headphone Impedance: 32Ω - 600Ω
Crosstalk
Microphone/ Line Crosstalk
-
Mic Input to Headphone Output: < -122dB; 20Hz - 20kHz (all other channels at 0dBFS)
-
Headphone Output to Mic Input: < -84dB; 20Hz - 20kHz (all other channels at 0dBFS)
Headphone Crosstalk
-
Left to Right: < -85dB; 20Hz - 20kHz (all other channels at 0dBFS)
-
Right to Left: < -85dB; 20Hz - 20kHz (all other channels at 0dBFS)
Digital Performance
-
Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
-
Clock Sources: Internal or from Dante Network Master.
Rear Panel Connectivity, Pots & Switches
Inputs
-
External Talkback Mic Input: 1 x XLR (F)
-
Foot Switch: 1 x 1/4" stereo jack
Outputs
-
Headphone Outputs: 1 x 1/4" stereo jack
Pots & Switches
-
Power Switch: 1 x Switch
-
Talkback Gain Pot: 1 x Pot
-
Talkback Switch: 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback).
PSU & Network Connections
-
PSU (PoE and DC): 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector.
-
Network: 1 x Standard RJ45 connector.
Top Panel Indicators
-
LCD Screens: 2 x Screens (Control, Status, Metering & Menus)
-
Control Functions: 2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 x Multi-Function Switches (Sources, Talkback, Monitor Outputs & Menu Items). 12 x Single-Function Switches (Headphones, Sum, Spill, Mode, Mute, Solo, Outputs, A/B, Cut x 2, Dim & Output Lock).
Power
-
Power over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)
-
DC Power Supply: 1 x 12V 1.2A DC Power Supply.• Power Consumption: PoE: 10.3W - DC: 9W (When using supplied D PSU)
Heat Performance
-
Operating Temperature: Operates at up to an ambient temperature of 40 degrees Celsius
Product Dimensions:
-
265mm (10.43") width x 135mm (5.31") depth x 58mm (2.28") height
-
Weight: 1.09kg