With the AIRLITE mixer you can now own a modern type of radio mixer for a very attractive price.
It’s a new carefully handmade piece of precision equipment and well built around proven low noise circuitry.
It is an intelligent mixer with an internal USB control section that comfortably enhances daily use and even has a silence detector built in.
It is a reliable workhorse for the self-op production D.J.
It has a built in Telephone VOIP functionality, 4 in/out channels of stereo USB and 3 very low noise Mic inputs.
The AIRLITE stands for a complete radio system, ideal for ON-AIR, Production and especially streaming to the web.
It is built into a heavy duty RF shielded chassis, designed with elegantly rounded corners.
And...“dropped” into your furniture it gives that exciting radio look. There is hardly no excuse that is keeping you from making radio you always wanted.
Built with a strong powder coated front panel for lasting looks, reliable and the result of more than 48 years of experience at D&R.
Smart Module Programming
The AIRLITE modules can be easily tailored to your own needs as you can see on the software program pages shown below or in the manual. All 8 modules have their own page where you can program Cue reset enabled by line, Mic, Fader, On etc.
You can even decide if you want 10dB fader gain or not. Both ON-AIR busses 1 and 2 can be enabled by Line or Mic.
You can even program your own switch colors, activate the CRM mutes per module and program the Studio Remote and if you want your Phantom on or off individually, this is programmable per channel.
GPIO functions have the following states; - Continuously - Pulse by ON - Pulse by OFF - Pulse by ON/OFF
And... all settings can be stored (write) and loaded (read), see the software pages below that indicates all its possibilities.
The manual gives of course more detailed info on this subject.
Straight forward Master Section
The master section is designed for Radio. It houses all the master controls such as the stereo Aux send and return, Control Room Monitor (CRM), Announcer and a high level, low impedance, phones output.
Auto Cue provides both the Announcer and CRM outputs to follow the CUE selections. CUE reset cancels all activated Cue selections. Of course the Control Room Monitors are muted automatically to cut control room level when the D.J. Mic is active.
A Studio output (announcer) that normally follows the main output can be routed by activating Auto Cue in a way any Cue signal that is selected can be heard.
Three Talk-back switches individually activate the built-in talkback microphone which has its own gain control for communication to VOIP, Announcer and Aux outputs.
Talkback can also take place to all outputs at the same time.
The NON STOP button at the top of the design routes USB channel 4 to the program output when activated.
Specifications: