Darkglass Microtubes 900 v2

Cena 142.800,00 din. PPC: 157.080,00 din. (-9%)
Raspoloživo za 10-20 dana Na stanju u:
Količina:
dodaj u korpu Dodaj u listu želja

Pre tri godine Darkglass Electronics je objavio svoje prvo pojačalo Microtubes 900. Njegove neobične osobine i dizajn su proslavile Darkglass kao ni jedan od prethodnih proizvoda. Bilo je to beskompromisno pojačalo, neverovatno kvalitetno i glasno. Sada, hiljadu dana nakon što su prvi Microtubes 900 izašli iz proizvodnje, ponosni smo što objavljujemo sledeći korak u evoluciji ovog uređaja. Microtubes 900 v2 je sinonim za kvalitet !

0 Komentara

Ostavite Vaš komentar

OPIS PROIZVODA

Three years ago Darkglass Electronics released it’s first amplifier, the Microtubes 900. Its unusual features, and design embodied the Darkglass ethos like none of our previous products. It was an uncompromising amplifier, incredibly versatile, and unapologetically loud. Now, a thousand days after the first Microtubes 900 saw the light of day, we are proud to announce the next step in its evolution, the Microtubes 900 v2. 
 
With enhanced durability, improved equalizer, studio-grade compression, impulse response cabinet emulation, and MIDI control, the Microtubes 900 v2 features all the options the modern, professional bassist needs in a compact, sleek, and loud format.

Front Panel Features

Input
Use this jack to connect your instrument via a standard 1” mono cable.
 
Passive/Active
Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).
 
Microtubes
Use this push button to turn on or off the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. 
The Microtubes Engine operates before the clean section (you can therefore use the 6 Band Active EQ for additional tone shaping in addition to the Tone knob described below).
 
Compression
This knob controls the amount of dynamic compression added to the Microtubes Engine. 
The make up gain is adjusted automatically. The compression can be turn off or assigned using the Darkglass Suite.
 
Drive
This knob controls the amount of distortion that the Microtubes Engine will deliver. It will change from a soft warm overdrive to a massive modern distortion sound.
 
Tone
This knob controls the high harmonic content of the Microtubes Engine via a variable low pass filter: crank it up for additional attack and definition or dim it down for a smoother sound, especially handy if already running bright clean EQ setting or cabinets with tweeters.
 
Level
Use this knob to control Microtubes Engine’s output volume.
 
Blend
Use this knob to mix between the Clean signal and the Distortion signal (Microtubes Engine).
 
B3K/VMT
This push-button switch selects between two overdrive voicings: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.
 
Gain
Use this knob to change the volume of the signal before the Active 6 Band EQ. You can set it low for ensuring the cleanest operation possible or set it higher for more aggressive growl.
 
Bass
+-12dB at 80Hz. Use this knob to change the low content of the signal.
 
Mids
+-12dB at 250, 500,1.5K and 3Khz. This graphic eq control the mid content of the signal.
 
Treble
+-12dB at 5kHz. Use this knob to change the high content of the signal.
 
Master
Use this knob to control the overall volume of the amplifier.
 
Mute
Use this push button to mute the amplifier.

Back Panel Features

Speaker Output
Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or 1” speaker cable operation. The outputs are connected in parallel. 
 
Min-Load
Press this switch when using a 2? load. You can use this control to lower the output if your 4? cabinet is not able handle more than 500W (you can also get 350W with an 8? cabinet in this configuration).
 
Send
Use this output to send the signal to effects pedals.
 
Return
Use this input to receive the signal from effects pedals. Master volume control is after this input.
 
Ground Lift
Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.
 
Pre DI Output
Use this output to send a balanced copy of your input signal to recording equipment, mixer etc. The output is latency compensated to match with the Post DI Output.
 
Post DI Output
The signal for this output is taken after the distortion, EQ and effects loop, and processed through the cabinet simulation engine. The output is latency compensated with the Pre DI Output, and not affected by the master volume.
 
USB
The USB connector allows you to use the Darkglass Suite to load different cabinet impulses or change different parameters on your amp (midi, compressor, etc)
 
Headphone Output
Connect your Headphones and enjoy the impulse based cabinet emulation.
 
Headphone Volume
This knob controls the volume of the headphone output.
 
Aux In
Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc.
 
Cabinet Select
Switches between 3 different cabinet impulses and bypass this section for a rawer sound. Hold this button enter MIDI Learn mode to choose the MIDI channel.
 
MIDI
The midi input allows you to change channels, toggle the mute and compressor, and select the cabinet simulation slot with any standard MIDI device. Both Program Change and Control Change commands can be used.
 
Footswitch
The Intelligent Footswitch is proprietary digitally controlled device that allows you to remotely engage and disengage the Microtubes Engine. You can also hold the footswitch to Mute the amplifier. The VMT/B3K push button will remain operational with the Intelligent Footswitch plugged in. 
 
· You can use a regular mono instrument cable to connect the amplifier to the footswitch. 
· You must remove the cable from the footswitch jack in the rear panel if you want to control the amp from the front panel.
 
AC Socket
Use this connector to feed electric power to the amplifier. 100 - 230 VAC, 50Hz-60.
 
AC Power ON/OFF
Use this Switch to release the audio energy from your bass.
 
DIMENSIONS
26.7cm l x 7cm h 25.5 w (10.5”l x 2.75”h x 10”w) / Weight: 2.9Kg (6.39Lbs)
 
WARNING
· No user serviceable parts inside the amplifier. Do not open the amp.
· Never use the amp at a high moisture environment or near liquids.
· The Microtubes 900v2 can deliver more than 115 dB of power. Exposure to this level of sound can damage your hearing. Use proper hearing protection if you will be exposed.
· The Microtubes 900v2 can deliver more than 900 Watts. Be sure that your speaker cabinet is able to deliver that power. You can reduce the output of the amp by selecting the 2? mode on the rear panel (by the SpeakON output jack).
· Do not cover the vent holes. The Fan and vent holes are part of the cooling system of the amp. Covering the vent holes can damage the power amp by overheating it.
· Don’t use an instrument cable as speaker cable. An instrument cable is not designed to deliver the type of power signals sent from the amplifier to the speaker.

 

Cena 142.800,00 din.
PPC: 164.280,00 din. ( -13% ) Raspoloživo odmah
dodaj u korpu

Pritiskom na dugme “Potvrdite”
obavezni ste na kupovinu artikla ukoliko Vaša ponuda bude najveća.

Artikal:
Aktuelna ponuda:
Vaša ponuda:

U slučaju odustajanja od kupovine Audio Pro Artist d.o.o. zadržava pravo potraživanja sredstava od strane kupca (po potrebi i sudskim putem)

Komentari kupaca

Behringer Foot Controller FCV100

Zoran Jerotijevic

Neprevazidjena pedala za skromne pare

Behringer Xenyx 302USB

Dragan Radojevic

Hi, does it have 48v power ?

IK Multimedia iLoud Micro Monitor White

Igor Nedeljković

Koliko novca!?

Behringer Headphones HPM1000

Aleksandar Pavkov

Postovani, cena dostave paketa putem PostExpress kurirske sluzbe sa otkupom iznosi? Hvala na odgovoru. Sve najbolje zelim.

Behringer Power Supply PSU3-EU

Aleksandar Mandic

dali ovaj adapter (Behringer Power Supply PSU3-EU) moza za Behringer Xenyx 1002FX? Pozdrav.....

Modal SKULPT | Analog Synth

Nemanja Acimovic

Vrlo zgodan mali digitalni synth, naravno ne treba ocekivati ludilo od njega s obzirom da je ipak dosta jeftiniji od analognih , ali zaista koristan i upotrebljiv. Zvuci vrlo ubedljivo sirom celog frekfentnog spektra. Mene je posebno privukao real time seqvencing-om i arpeggiator-om. Trebace vam malo vremena da se naviknete na kontrole s obzirom da svako dugme pomocu SHIFT-a ima duplu funciju, ali nakon samo par dana ce te bez problema biti u potpunoj kontroli. Treba reci da je dosta lagan i prilicno plastican, ali to je predpostaljam kompromis koji je napravljen spram cene. Uz njega ide i ModalAPP ili VST3 koj vam daje potpunu kontrolu nad svim funkcijama u vasem DAW-u ili na recimo telefonu. Moja ocena je 4- Radujem se sledecem izdanju ModalElectronic-sa mladjem bratu Skulpt-a, CRAFT synth-u.....

Numark Mixtrack Platinum DJ controller

Nenad Djordjevic

Nenadmasiv odnos cene i kvaliteta u entry / intermediate klasi. Ako mislite da sam suvise subjektivan, proverite sta kazu ljudi po netu. #1 kontroler u svom rangu apsolutno svugde, a pristupacan apsolutno svima. Svestrane mogucnosti, kapacitivni touch jog wheels kakve u ovom cenovnom rangu verovatno ne mozete ni da zamislite, multi FX kontrole (touch strip super radi, meni licno na VDJ platformi odgovaraju mnogo vise nego klasicni knob-ovi), 100mm super precizni pitch faderi, instant 4 deck kontrole, brzi trigger-happy performance padovi, sve u svemu u jednom paketu bez trzisno planiranih nedostataka i za vynil i za electronica DJ-eve (kucne i pro, bez blama). Jedina mana mu je, po meni, Serato lite bundle, ali izbor softvera je vec licna stvar. Prezadovoljan sam, cak i sa 99$ dodatnim troskovima za VDJ licencu.

KRK Rokit RP5 G3

Jovan Badnjar

Sjajni monitori po najpovoljnijoj ceni u gradu. Prezadovoljan sam kupovinom, odusevila me je sjajna stereo slika i kvalitet visokotonaca na Rokit 5-ici. Bas je utegnut i precizan ide do 45Hz sto nije najbolje moguce ali ne mozete ocekivati od 5" jedinice da pruzi najdublji moguci bas. Ekipa u Audio pro ekstremno prijatna i ljubazna. Sve pohvale!!

Focusrite Scarlett 2i2 Studio (2nd Gen)

milan mladenovic

Audio interface je odlican! Super lako je raditi sa njim! Dobijas uz njega dosta dosta dobrih softwera..... Svaka topla preporuka!!!

Rode NT1-A

Ermin Aljicevic

Odličan mikrofon, jedva čekam da ga kupim kod vas.☺️

Artikl je dodat u korpu

Količina: