The Ultimate Instrument Mic Holder
The DCLIP is a heavy duty, simple to use mic clamp system that attaches to a mic stand or any number of popular stands with either a 3/8” or 5/8” threaded surface. Such products include boom stands, tri-pods, Audix DVICE, Audix DCLAMP, and other drum mic clips. The CLIP is provided with a thread adapter that allows it to be used with European 3/8” mic stands. Optimized to be used with the Audix D Series instrument mics, the DCLIP will work with any mic barrel with an OD (outer diameter) measurement of 19 mm - 23 mm.
TO OPERATE
The best method to place the mic into the clip is to snap the mic down into place from the top side of clip (see photo bottom right). Do not try to slide the mic into the end of the clip as the clip is intended to expand only from the top. This snap-to-fit design provides a very tight grip on the barrel microphone holding it firmly in any position. The metal thumbscrew allows the clip to rotate the position of the mic 180°. The thumbscrew locks firmly into place without having to over-tighten. To loosen the thumbscrew, simply turn counter-clockwise. It is not necessary to loosen the thumbscrew more than 1/4 turn. Note that the screw and bolt will come apart if loosened more than 2 complete turns.
Features:
-
Heavy duty nylon material
-
Metal thumbscrew locks holder firmly into position
-
Works with a wide variety of popular microphones
-
Durable brass threads
-
1 year warranty