This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features:
-
VM95 Series dual magnet cartridge with 0.6 mil conical stylus
-
Aluminum cantilever
-
Specially wound coils increase output voltage
-
Durable low-resonance polymer housing
-
Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
-
Compatible with any AT-VMN95 replacement stylus
Specs:
-
Frequency Response: 20-20,000 Hz
-
Channel Separation: 18 (dB at 1 kHz)
-
Vertical Tracking Angle: 23°
-
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
-
Stylus Construction: Bonded round shank
-
Recommended Load Impedance: 47,000 ohms
-
Coil Impedance: 3.3 k ohms (1 kHz)
-
DC Resistance: 485 ohms
-
Coil Inductance: 550 mH (1 kHz)
-
Load Capacitance: 100 to 200 pF
-
Output: 4.0 mV (1 kHz, 5 cm/sec.)
-
Channel Balance: 2.5 dB (1 kHz)
-
Stylus Shape: 0.6 mil conical
-
Cantilever: Aluminum pipe
-
Mount: Half-inch
-
Weight: 6.1 g (0.22 oz)
-
Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
-
Replacement Stylus: AT-VMN95C
-
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers